How to Make Your Own Paper (From Your Old Jeans)

would never desired had some use for your old jeans, stained, mangled? They are also chewed to donate to charity or even to make a decent pair of shortcuts, but you hate to send to the landfill. You could cut into squares of a quilt, but if you’re being honest, you probably never will get around what is and fabric will just occupy space in your wardrobe for the next five years. However, there is a great way to recycle old jeans and turn them into a new and useful product: by turning them into paper. All that is really required for the manufacture of paper is fibers of some sort, so the hardest part of using your jeans will be to separate the fibers.

1. to begin the process of breaking the fabric, cut it into squares about 1 inch (no need to be precise). Remove seams or anything else that is double layer since it will be very difficult to work with. The same thing in any metal part.

2. Configure a large boiling pot and tip in the jean material so that it is fully submerged. Leave on low boil for about an hour (not must boil). Some fibers should begin to break during this process, but much of the fabric can remain intact (although loosened).

3. the next step is going to sound a little strange, but it is probably the easiest finish breaking apart the fibres (lack of purchase of industrial equipment). Place about 1 cup of fabric in the processor of food along with 1 cup of water (the pot is very well), a cup of Elmer glue and a teaspoon of salt and cornstarch. Mix all the ingredients until the content is very mild. Repeat until all the jean material is pulp. (* If you do this often, the blade will quickly become Matt, so it can have a food processor dedicated to the boat so that you use it for food is nice and strong when you go to make the pesto).

4. for the next step, you will need a frame (which is the size that you want your paper to be. You can use an old window screen (which can make fairly large leaves), staple the mesh in a smaller frame, or simply use a piece of heavy felt cut to size. Please note that different frames will produce different paper textures, so feel free to experiment. Once your jean, simply pour pulp is mixed in the box (you may want to do this over the sink for easy cleaning).

5. the bulk of its work will be determined by how much paste pour onto the frame, so start slowly. When the box is full, evenly press the pulp with your hands or use a roller to press flat. Add more if you think too thin. If leftover pulp, save it for later in a sealed jar or bucket.

6. Place your frames to dry for twenty-four hours in an area that has low humidity (a wet basement will not do the trick and you won’t want to leave outdoors during the night, either).

7. When the paper is dry, simply remove the frame. With practice, you can do sheets of thickness approximately equal each time, so don’t get discouraged if it seems irregular or lumpy at first. Use the handmade paper for stationary, cardboard or packing paper and dressed up with some embossed metallic thread tools and seals.


>

Leave a Reply

Your email address will not be published. Required fields are marked *